Autocue MSP08 Master Series Prompter - Manual (Page 19)

www.qtv.com 14 www.autocue.com
Section 5: MSP08 Connections
Physical characteristics
Video and power inputs
MSP08
Assembly and Installation
Guide
Issue
#
: 081
016
©
2003
-200
8
Au
to
cu
e Grou
p Ltd
5.1.1: Video and power inputs
Connect video cables and power leads to the sockets on the side of the .prompter
display unit.
Power. Use either a standard mains electrical supply cable to the Mains Input
socket or use the supplied 12 V DC XLR connector to the DC Input socket.
Video. You can connect a video signal via the Video In BNC or use the
prompter display unit directly from your computer using a standard VGA cable.