Wood’s Powr-Grip MRPT1211LACO - Manual (Page 7)

Rev 0.0/2-13 5 MRPT1211LACO: #35065
Note: Some hoisting equipment hooks could interfere with an upright load that extends
beyond the lifter's pad frame. If the load would contact the hook during lifter operation, the
operator must prevent this by attaching a sling (or other rigging that does not interfere with
the load) between the hook and the lift bail.
WARNING: Any sling used must be rated to carry maximum load weight plus
lifter weight.
A hoist control pendant can be attached to the lifter by inserting it into the pendant basket
provided. Remove the pad covers and save them for use whenever the lifter is stored. Now
the lifter is operational.
4) Perform Operational and Load Tests for the lifter as directed in MAINTENANCE: T
ESTING
S
CHEDULE
.