MTS Echo Software - Manual (Page 26)

MTS Echo™ Software
Create and Edit Lab Views
26
Assign Test PCs to a Lab
Perform this procedure on each Test PC within a given lab.
Important In a PC per Station setup, only run the MTS Echo widget from
the Master PC. Do not run the MTS Echo Widget on the Client
PCs.
1. If a lab(s) have not already been created, use the widget to create the lab
to which the test pc will be assigned for each physical lab within your
facility.
See “Create a Lab” on page 25.
2. On the MTS Echo widget, click Settings.
3. In the Settings window, click Labs.
4. From the Assign this Test PC to a lab list, select a lab.
5. Click Save.
The Test PC is now assigned to the lab.
6. Repeat this procedure for each Test PC that you want assigned to a lab.