H&H Specialties 600 Series Track Installation Instructions - Manual (Page 7)

35
600 SERIES COMPLETE TRACK COMPONENT GUIDE
GENERAL SPECIFICATIONS: MEDIUM-DUTY CURVED TRACK - RIGGED
Provide Model 601A as manufactured by H & H Specialties Inc., South El Monte, CA.
Track shall be 3-3/8" I-beam, with 1" top, intermediate, and bottom flanges, extruded from mill finish 6063-T5 alu-
minum. Provide unspliced in lengths up to 20'.
Suspend track with two-piece clamp hanger formed from 11 gauge steel. Provide 2' overlap at center, rigidly
separated by two overlap clamps. Install end stop with cord support at each track end. Where lengths exceed
20', connect tracks with 8" long, two-piece splicing clamp of 8 gauge steel.
Provide single carriers, spaced on 12" centers, constructed of two Delrin wheels fastened parallel to formed steel
carrier body with swivel hook for attachment of curtain. Attach Nylatron wear strips at contact points between
carriers and track to minimize friction and noise. Install two neoprene bumpers between carriers to further reduce
noise.
Master carriers shall be two connected assemblies pivoting on a steel body with two cord clamps for anchoring
operating line.
Single and double end pulleys shall clamp securely to the track and shall contain 4" diameter sheaves enclosed
in steel housings to prevent operating line from escaping the grooves. Sheaves shall be Nylatron GS molded
around shielded and greased ball bearings.
Provide spring tension floor block in 3-piece, 14 gauge steel housing containing 4" Nylatron GS shielded ball
bearing sheave.
Black operating line shall be 1/4" diameter, stretch-resistant rope with spun polyester outer jacket double braided
over solid aramid core. Install ball bearing idlers and spindles where necessary to guide operating line around
inside and outside of track curves.
All steel components shall be zinc plated to resist corrosion.
PART No. DESCRIPTION 601A 601W 616A 616W 628A 628W
601 Single Carrier ŏ ŏ
602 Master Carrier ŏ
603 Double End Pulley ŏ ŏ ŏ
604 Single End Pulley ŏ ŏ ŏ
605 Overlap Clamp ŏ ŏ ŏ
606 Clamp Hanger ŏ ŏ ŏ ŏ ŏ ŏ
607** Splice ŏ ŏ ŏ ŏ ŏ ŏ
608 Tension Floor Block ŏ ŏ ŏ
610 Track ŏ ŏ ŏ ŏ ŏ ŏ
611** Ceiling Hanger * * * * * *
614 1/4” Operating Line ŏ ŏ ŏ
616 Nylon B.B. Single Carrier ŏ ŏ
617 Nylon B.B. Master Carrier ŏ
618 Double Spindle *** *** ***
619 Single Spindle *** *** ***
620 Outside Idler *** *** ***
621 End Stop ŏ ŏ ŏ
628 Neoprene B.B. Single Carrier ŏ ŏ
629 Neoprene B.B. Master Carrier ŏ
639 End Stop & Cord Support ŏ ŏ ŏ
642 Master Carrier ŏ
647 Nylon B.B. Master Carrier ŏ ŏ
649 Neoprene B.B. Master Carrier ŏ
*
For ceiling mounted applications, No. 611 provided in lieu of No. 606 Clamp Hanger. When ordering, please specify
whether track is ceiling mounted or suspended.
**
Track lengths and splices supplied as required from stock sizes.
***
No, 618, 619, and 620 must be ordered as additional accessories. Quantity is determined by length of track
DQGFRQ¿JXUDWLRQRIEHQG
For COMPLETE tracks with black finish, add sufix "B" to part number.
Examples: 601W changes to 601WB and 628A changes to 628B.
&