Barco MD-4221 - Manual (Page 23)

23
● Power LED
Green : Normal mode
Amber: Standby mode
Amber: Soft power-off
● On-Screen Display (OSD) Function Button
1. POWER : Turns ON/OFF the monitor.
2. MENU : With OSD deactivated, Activate the OSD menu.
With OSD activated, Exit from main menu
or sub menu.
3. PIP : With OSD deactivated, Hot key of PIP mode.
4. UP : With OSD deactivated, Hot key of the brightness control and increases
the brightness.
With OSD activated, move the cursor upward.
5. DOWN : With OSD deactivated, Hot key of the brightness control and decreases
the brightness.
With OSD activated, move the cursor downward.
6. MINUS : With OSD deactivated, Hot key of the contrast control and decreases
the contrast.
With OSD activated, decreases the adjustment of the selected
function.
7. PLUS : With OSD deactivated, Hot key of the contrast control and increase the
contrast.
With OSD activated, enter sub menu and increases the adjustment of
the selected function.
8. INPUT : Change the display signal source. If VGA Analog's picture size not
matched with full screen size or image is noisy press the input button
during 2~3 seconds then you can see the most appropriate screen.
Power management
This monitor does not adhere to the VESA DPMS standard when no signal is present on
the video inputs.
Status LED sign Power Consumption
Normal Mode Green on <260W
Standby Mode Amber <17W
Soft power-off Amber <14W