Bosch 2400EO - Manual (Page 9)

9
Using the remote control
6 720 606 990
temperature indication is shown on
the remote control LCD.
B Switch ON/OFF switch to “OFF”
position (0) and then back on (I).
B Press buttons or in order
to reach requested temperature.
New remote control is programmed.
4.4 Hot water temperature
adjustment by remote
control
B Press the buttons or on
the remote control (Fig. 8, pos. 2)
until the required temperature
appears on the remote control
display (Fig. 8, pos. 1).
B When the required temperature is
displayed, turn on the hot water tap.
B The required temperature will flash
on the remote control display.
B The flashing will stop when the
required temperature is reached
(tolerance from selected set point +/
-5°F (+/- 2°C).
Fig. 8 Temperature adjustment
4.5 "Program" button on the
remote control
Memorizing the water
temperature with the remote
control "Program" button
B Press the buttons or on
the remote control (Fig. 9, pos. 2), )
until the required temperature
appears on the remote control
display (Fig. 9, pos. 1).
B You will now be able to memorize
this temperature by pressing the
"Program" button on the remote
control (Fig. 9, pos. 3) for 3
seconds.
i
Note: Previously saved
temperature may show
on the display when first
pushing the program
button. Once "PR"
shows on the display,
the desired setting will
be saved.
6720606990-0701_(Remote control).fm Page 9 Tuesday, January 30, 2007 10:07 AM