Brother T74 - Manual (Page 96)

90
Chapter
Remote Commands
Change Fax Forwarding Setting
Press 9 5 .
then to Turn feature off press 1 .
Enter Fax Forwarding press 2 .
Program Fax Forward Number press 4 . Enter the
new number of the remote fax machine where
you want your fax messages forwarded, and then
press
# # . Press 9 6 1 after two short beeps, then
enter the number of remote fax machine, and then
# # to retrieve Memory Status List.
Turn Fax Storage on press 6 .
Turn Fax Storage off press 7 .
Retrieve a Fax
Press 9 6 .
then to Print a Memory Status List press 1 , then enter the
number of remote fax machine, and then # # .
After the beep, hang up and wait.
Retrieve all faxes press 2 , then enter the number of
remote fax machine, and then # # . After the beep,
hang up and wait.
Erase all fax messages press 3 .
Check the Receiving Status
Press 9 7 1 .
1 long beep – Fax message(s)
3 short beeps – no messages
Changing Remote Access Code
1 Press Menu/Set , 8 , 7 .
2 Enter a three-digit number from 000 to 900.
The cannot be changed.
3 Press Menu/Set .
4 Press Stop to exit.
Remote Commands
Listen to Voice Messages
Press 9 1 .
then to Repeat a message press 1 .
Skip to next message , press 2 .
Stop playing the message press 9 .
Record a Memo
Press 9 2 .
Wait for the beep, then speak.
then to
Stop recording – press 9 .
Erase All Messages
Press 9 3 . If you hear three beeps, all messages
have not yet been heard, and the messages
will not be erased.
Play/Record Outgoing Message
Press 9 4 .
then to Play Message Centre OGM press 1 1 .
Play F/T OGM press 1 2 .
Record new Message Centre OGM
press 2 1 , then speak after beep.
press 9 to stop.
Record new F/T OGM press 2 2 ,
then speak after beep. press 9 to stop.
Change Paging/Fax Forwarding Setting
Press 9 5 .
then to Turn feature off press 1 .
Enter Fax Forwarding press 2 .
Enter Paging press 3 .
Progrm Fax Forward Number
press 4 . Enter the new number of
the remote fax machine where
you want your fax messages
forwarded, and then press
# # .
Press 9 6 1 after two short beeps,
then enter the number of remote
fax machine, and then
# # to
retrieve Memory Status List.
Retrieve a Fax
Press 9 6 .
then to Print a Memory Status List press
1 , then enter the number of remote
fax machine, and then # # . After
the beep, hang up and wait.
Retrieve all faxes press 2 , then
enter the number of remote fax
machine, and then
# # . After the
beep, hang up and wait.
Erase all fax messages press 3 ,
2 3
4 3 2