Brother T74 - Manual (Page 95)

89
Accesssory List
*For optimum print quality and product perfomance within published specifications, use only
the correct Brother replacement ribbon. The use of other ribbons may invalidate your
warranty.
Model Name Description
PC-70 Printing Cartridge (1 set per box)
PC-71RF 1 re-fill for use in PC-70 Printing Cartridge
PC-72RF 2 re-fills for use in PC-70 Printing Cartridge
PC-74RF 4 re-fills for use in PC-70 Printing Cartridge
Change Answer Mode
Press 9 8 .
then for TAD , press 1 .
Fax/Telephone (F/T) , press 2 .
Fax , press 3 .
Exit Remote Operation
Press 9 0 .
Change Remote Access Code
1 Press Menu/Set , 8 , 3 .
2 Enter a three- digit number. The cannnot be changed.
3 Press Menu/Set .
4 Press Stop to exit.
Using Remote Access Code
1 Dial your machine phone number from a touch tone
phone.
2 Enter your Remote Control Access Code (159 ) after
the beep.
3 Your machine signals the kinds of messages received:
1 long beeps – Fax message(s)
No beeps – no messages
4 After 2 short beeps, enter a command.
5 Press 9 0 to reset your machine when you finish.
6 Hang up.
R
EMOTE
C
ONTOROL
A
CCESS
C
ARD
Check Receiving Status
Press 9 7 .
then for Fax message , press 1 .
Voice message , press 2 .
1 long beeps – received messages
3 short beeps – no messages
Change Answer Mode
Press 9 8 .
then for Message Centre , press 1 .
Fax/Telephone (F/T) , press 2 .
Fax Only , press 3 .
Exit Remote Operation
Press 9 0 .
Using Remote Access Code
1 Dial your fax machine phone number from a
touch tone phone.
2 Enter your Remote Control Access Code
(159 ) after the beep.
3 The fax machine signals the kinds of
messages received:
1 long beep – Fax message(s)
2 long beeps – Voice message(s)
3 long beeps – Fax and Voice message(s)
No beeps – no messages
4 After 2 short beeps, enter a command.
5 Press 9 0 to reset the machine when you
finish.
6 Hang up.
M ESSAGE C ENTRE
R EMOTE C ONTOROL A CCESS C ARD
(For FAX-T74)
(For FAX-T76)
1
1 4
5