Autoquip SUPER TITAN DOUBLE LONG - Manual (Page 32)

32
Figure 6.1
If for any reason you are unable to lower the lift completely onto the
maintenance devices, stop immediately and consult the factory. Failure to
properly use the factory approved maintenance devices could result in
severe injury or death.
5. Once the maintenance leg is properly and securely engaged, continue to press the down button,
valve or switch for an additional 5-10 seconds to relieve all pressure in the hydraulic system (it could
take longer in a pneumatic system).
Failure to relieve operating system pressure could result in the sudden
and unexpected release of high-pressure fluids (or air) during
maintenance and/or repair of the lift, resulting in severe injury or death.
6. Follow OSHA electrical lock-out/tag-out procedures. Disconnect and tag all electrical and/or other
power sources to prevent an unplanned or unexpected actuation of the lift.
7. Once inspection or work is complete, reverse the performance of the steps above to raise the lift off
the maintenance leg and place the leg back into the designated storage position.
^ DANGER
^ WARNING