Autoquip SUPER TITAN DOUBLE LONG - Manual (Page 30)

30
5. OPERATION
5.1 Raise And Lower Lift
Prevent serious injury or death.
Before operating lift, all personnel interacting with lift must read,
understand and follow instructions and safety warnings in this manual.
Adjusting safety relief valve may result in premature motor failure.
Do not adjust safety relief valve.
Raising loads exceeding rated capacity of lift may result in excessive wear and damage to lift.
Prevent serious injury or death.
Personnel must maintain a safe operating distance of at least 36” any time
lift is operated.
1. Verify all personnel are away from lift.
2. Press “UP” button to raise lift. Release button when lift reaches desired
position.
Do not operate lift on relief for more than a few
seconds. When on relief, valve will make a squealing
sound.
3. Press "DOWN" button to lower lift. Release button when lift reaches
desired position.
4. For lifts supplied with throw-over bridges, make sure bridges are in the stored (raised) position prior to
raising or lowering the lift, and when backing up trucks for loading/unloading - to ensure that the
bridges will clear all possible obstructions and contact with a moving truck.
^ WARNING
NOTICE
^ WARNING
NOTICE