AirLive WLA-9000AP - Manual (Page 120)

6. Command Line Interface
113 AirLive WLA-9000AP User’s Manual
‰ Example:
Command> set dtim interval 1
Radio1 DTIM interval: 1
„
set user limitation
‰ Purpose: To set the user limit for wireless interface
‰ Example:
Command> set user limitation 100
Radio1 user limitation: 100
„
set age out time
‰ Purpose: To set the age timeout for wireless clients.
‰ Example:
Command> set age out time 5
Radio1 age out time: 5
„
set transmit power
‰ Purpose: To set the TX output power value of the radio
‰ Example:
Command> set transmit power 20
Radio1 transmit power: 20
„
set data rate
‰ Purpose: To set the date rate. For example, 54mbps, 36mbps….etc
‰ Example:
Command> set data rate 54
Radio1 data rate: 54
„
set acktimeout <11A>