AirLive WLA-9000AP - Manual (Page 112)

6. Command Line Interface
105 AirLive WLA-9000AP User’s Manual
„
show mode
‰ Purpose: Show what operation is WLA-9000AP currently set to
‰ Example:
Command> show mode
operation mode: access point
„
show wireless setting
‰ Purpose: Show wireless settings
‰ Example:
Command> show wireless setting
Radio[1] operation mode: access point
ssid name : air2
wireless state : enable
ssid broadcast : enable
radio[1] mode : 11a
radio[1] channel : 64
„
show wireless security
‰ Purpose: Show current wireless security policy
‰ Example:
Command> show wireless security
Radio1 security policy: none
„
show settings
‰ Purpose: Show LAN or WAN port IP settings
‰ Example:
Command> show lan settings
Lan ip type : static
Lan ip address : 192.168.1.1
Lan ip netmask : 255.255.255.0
Lan ip gateway : 192.168.1.254