I.R.I.S. RISCard Anywhere - Manual (Page 12)

Using the scanner 9
Step 3: Inserting a memory card or connecting a USB
flash drive
Step 4: Turning the scanner on
Insert an unlocked (writable) memory card
into the memory card slot, or connect a USB
flash drive to the USB socket of the scanner.
NOTE :
• If both a USB flash drive and a memory
card connected to the scanner, the
scanner will only send the scanned image
to the USB flash drive, as the USB flash
drive has a higher file storage priority than
the memory card.
• The scanner only accepts FAT16 and
FAT32 file systems. NTFS and other file
systems are not supported.
• See Supported memory card types on
page 16 for all supported memory card
types.
• Refer to Inserting a USB flash drive on
page 13 for more information on how to
connect a USB flash drive.
1. Press and hold the Power button for 1
second. The Power and Status indicators
blink.
NOTE : For more information on the
indicators, see Indicators on page 7.
2. Wait until the Power indicator stops
blinking and then goes off. The Status
indicator will light up instead, indicating
that the scanner is ready.
NOTE : Do not insert an original into
the feeding slot when the Power
indicator is blinking. The original will
not be scanned.