Brother NC-2200W - Manual (Page 70)

APPENDIX A - 1
A
Running H/F 4
A
Appendix
Appendix A
General Information
Protocols
Protocols are the standardized sets of rules for transmitting data on
a network. Predetermined protocols allow the users to gain access
to the network-connected resources. The NC-2200w uses TC/IP
protocols to communicate and print.
■ TCP/IP
This is the most popular set of protocols used for communication
such as Internet and E-mail. This protocol can be used in almost
all the operation systems such as Windows
® , Macintosh ® and
Linux.
Protocol Configuration Items
TCP/IP Configuration
• IP Address
• Gateway (when routers exist on your network)
■ IP Address
An IP address is a series of numbers that identifies each computer
connected to the Internet. An IP address consists of four numbers
separated by dots. Each number is between 0 and 255. You must
allocate a unique IP address that is correct for the attached
network.
Example) In a small network, set the IP addresses by changing
the final number.
192.168.1.1, 192.168.1.2, 192.168.1.3