Brother NC-2200W - Manual (Page 36)

NETWORK PRINTING FROM WINDOWS ® 3 - 2
NC9100h_FM6.0
Quick Tips:
1 Windows ® 2000/XP users can print using TCP/IP using the
standard Network Printing software (Standard TCP/IP port) and/
or IPP protocol software built into any Windows
® 2000/XP
installation.
2 Windows ® 98/Me and Windows NT ® 4.0 users can send print job
using Brother Peer to Peer Print software provided by the NC-
2200w CD-ROM. This software makes the Brother LPR port as
the Windows
® Printing port.
3 You will need to search and/or assign the IP address or the node
name of the NC-2200w over the setup procedure. The default
node name for the NC-2200w is usually
BRN_xxxxxx (where
xxxxxx is the last six digits of the Ethernet address of the NC-
2200w). You can see this information from the Network
Configuration Page. To learn how to print the Network
Configuration Page, see Test Button on page 1-4.