Gradall 534D-10 (9134-4052) Operation Manual - Manual (Page 31)

Form No. 20219 z z z z z 534D-9/534D-10 Owner/Operator Manual
USE WITH: 9108-5058 48" SLOPE PILER
9130-5016 66" SLOPE PILER
STABILIZERS DOWN
1
2
3
4
5
6
71°
60°
50°
40°
30°
20°
10°
0°
-7°
STABILIZERS DOWN
48'
32' 36' 0' 4' 8' 20' 12' 16' 24' 28'
-4'
0'
4'
8'
12'
16'
20'
24'
28'
32'
36'
40'
44'
DEDUCT 300 LBS
FROM ALL CAPACITIES
WHEN MACHINE IS
EQUIPPED WITH WINCH
3000 LBS
4000 LBS
5000 LBS
6000 LBS
7000 LBS
8000 LBS
9000 LBS
10000 LBS
MODEL
534D-10
9135-3019
This Capacity Chart
may be used with
this model ONLY
These numbers
must match the
Part No. stamped
on the attachment
ID Plate
Capacity Chart Part No.
(shown on reverse side)
Boom Extension Numbers
Regions indicate the
maximum weight
that may be lifted
Boom Angle
SAMPLE ONLY - USE CHART IN CAB
12.3
Figure 12-4
Where to look on the machine.
Figure 12-5
Description of items on a Capacity Chart.
NOTE!
This is a sample Capacity
Chart ONLY! Do not use this
chart, use the one located in
your cab.
MACHINE SERIAL
NUMBER PLATE
BOOM
EXTENSION
NUMBER
BOOM ANGLE
INDICATOR
FORK WEIGHT
STAMP
ATTACHMENT
IDENTIFICATION
PLATE