Gradall 544D-10 (9136-4142) Operation Manual - Manual (Page 19)

Form No. 20220 z z z z z 544D-10 Owner/Operator Manual
To be performed at the beginning of each work shift.
•
If spark arrestors are required, be sure they are in place and in good working
order.
• Check to be certain that windows and mirror(s) are clean and undamaged.
Also make certain that mirror(s) are properly adjusted for operator’s view.
• Before removing filler caps or fill plugs, wipe all dirt and grease away from
the ports. If dirt enters these ports, it can severely reduce component life.
• When adding fluids, refer to lubrication section of Manual to determine proper
type.
Complete all required maintenance before operating unit.
CHECKS & SERVICES BEFORE STARTING ENGINE 4.0
Use extreme caution when
checking items beyond your normal
reach. Use an approved safety
ladder.
Before operating handler, complete
all required maintenance. Replace
or repair all damaged, worn or
missing components before
starting or operating handler.
Failure to properly maintain handler
could cause serious injury or death.
WARNING !
WARNING !
Service the unit in accordance with
the “Lubrication and Routine
Maintenance” schedule.
Inspect all structural members,
including attachment, for signs of
damage.
Inspect unit for obvious damage,
vandalism and necessary maintenance.
Check for signs of fuel, lubricant,
coolant and hydraulic leaks. Open all
access doors and look for loose fittings,
clamps, components and attaching
hardware. Replace hydraulic lines that
are cracked, brittle, cut or which show
signs of leakage or abrasion.
Use a piece of cardboard or paper
to search for leaks. DO NOT use
bare hands. If anyone is injured by
hydraulic fluid, including
penetration into the skin, obtain
medical help immediately!
WARNING !