Hale Fyr Port - Manual (Page 7)

HALE FYR PORT PUMP MODEL:
20FP-C8FR/C8SK OPERATION AND INSTRUCTION MANUAL
ENGINE DRIVEN,
PORTABLE CENTRIFUGAL PUMPING UNIT
INTRODUCTION
PURPOSE:
This operation and instruction manual is published to guide and assist in the
installation, operation, lubrication, maintenance and repair of the Hale FYR PORT
pumping unit.
The installer and operator should understand this manual and the engine
manufacturer’s operating manual before attempting to install or operate the unit.
IDENTIFICATION:
Whenever a question arises regarding your pumping unit, contact your Hale Dealer for
the latest available information. This dealer will also be able to advise you of the
nearest authorized engine dealer or refer to the supplied list of engine distributors who
can provide service for the engine in your pumping unit. Finally, if additional help is
needed, contact the Service Department of the Hale Fire Pump Company.
Please supply the complete pump model and serial numbers when requesting
information or ordering parts. The pump model and serial numbers are stamped (not
cast) on the Hale nameplate or on top of the pump head. For you convenience, fill in
the information on the hale nameplate below.
Always mention both the model number and serial number of your engine when
ordering engine parts. These numbers are found on the engine identification plate
attached to the engine.
To help you identify the parts used in your FYR PORT, a pump parts catalog is
included toward the back of this manual. To identify the engine parts used in you
pumping unit, refer to the engine manufacturer’s parts catalog.