Connect the wiring, Complete installation, Lamp replacement – Broan APE1 User Manual
Page 4
APE1 SERIES
Page 4
CONNECT THE WIRING
HE0059
9
Connect
House Power Cable to range hood wiring -
BLACK to BLACK, WHITE to WHITE, and GREEN or
BARE WIRE to
GREEN Ground Screw.
HOUSE
POWER
CABLE
GREEN
GROUND
SCREW
10
Re-install the wiring cover, bottom cover, and filters that
were removed in Step 3.
COMPLETE INSTALLATION
1
Pull the
Tab on the Light Lens forward to remove the
lens.
LAMP REPLACEMENT
2
Grasp
Lamp at Lamp Base, tilt lamp down and pull out to
remove.
3
Replace lamps. Use a 42 W
Fluorescent Lamp,
GX24Q-4 and tilt lamp up into position. For
Night Light,
use a 4 W, C-7 bulb.
4
Place front edge of light lens into
Slot. Push lens up and
snap it into place.
TAB
LIGHT
LENS
LAMP
BASE
LAMP
NIGHT
LIGHT
FLUORESCENT
LAMP
SLOT
CAUTION: Bulb may be hot! Refer to packaging for
further information.