Install mounting bracket – Broan WC26I User Manual
Page 9
- 9 -
INSTALL MOUNTING
BRACKET
DUCTED and NON-DUCTED HOODS
1. Construct wood wall framing that is flush
with interior surface of wall studs. Fig. 7.
Make sure:
a) the framing is centered over
installation location.
b) the height of the framing will allow the
mounting bracket to be secured to
the framing within the dimensions
shown.
2. After wall surface is finished, secure the
mounting bracket to framing with (2) 4.8 x
38mm mounting screws. See chart below
for mounting bracket location.
Notes:
a. Minimum hood distance above cook top must not be less than 22”.
A maximun of 28” above cook top is highly recommended for best capture of
cooking impurities.
Distances over 28” are at the installer and user’s discretion; and if ceiling height
and flue length permits.
b. Requires optional 10’ flue extension, ducted model AEWC26xB or non-ducted
model AEWC26xBN.
HOOD DISTANCE ABOVE 36” HIGH COOK TOP (see note a)
28”
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
47-1/4”
CEILING HEIGHT
8-FOOT
9-FOOT
22”
23”
24”
25”
26”
27”
41-1/4”
42-1/4”
43-1/4”
44-1/4”
10- FOOT (see note b)
45-1/4”
46-1/4”
41-1/4”
42-1/4”
43-1/4”
44-1/4”
41-1/4”
42-1/4”
43-1/4”
44-1/4”
47-1/4”
45-1/4”
46-1/4”
FRAMING BEHIND
WOOD CROSS
SUPPORT
WOOD CROSS
SUPPORT BEHIND
DRYWALL
DRYWALL
FIG. 7