Pioneer AVH-P4000DVD - Manual (Page 59)

# No Data is displayed for empty assignment.
Even if the assignment is taken, you can replace
it to the new one by keeping touching the assign-
ment.
Recalling preset numbers
1 Touch LIST to display preset assign-
ments.
Preset assignments appear in the display (if
not displayed yet).
2 Touch one of preset assignments.
The selected phone number should now be
displayed on the information bar.
3 Touch to make a call.
4 To end the call, touch .
Making a call by entering
phone number
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
1 Touch DIRECT to display the direct dial
display.
2 Touch 0 to 9 to input numbers.
# For an international call, touch add “+” to add
+ to the phone number.
# Touch CLEAR to delete the number. Touch and
hold
CLEAR to delete all the input numbers.
# Up to 24 digits can be entered.
# If you want to store the entered phone number
to preset assignment, touch
SET here. The display
returns to the normal display and the phone num-
ber you entered is selected.
3 When you completed entering the
number, touch to make a call.
4 To end the call, touch .
Clearing memory
1 Touch CLEAR MEMORY on the function
menu.
2 Touch CLEAR next to the item you want
to delete from the memory.
Select from the following:
! PHONE BOOK (phone book)
! DIALED CALLS (dialled call history)
! RECEIVED CALLS (received call history)
! MISSED CALLS (missed call history)
! DIAL PRESET (preset phone numbers)
After selecting a desired item, a confirmation
display appears. Touch
OK to delete the mem-
ory.
# If you do not want to clear memory that you
have selected, touch
CANCEL.
# If you want to clear all the Phone Book,
dialled/received/missed call history list and pre-
set phone number, touch
CLEAR ALL.
Setting automatic answering
% Touch AUTO ANSWER on the function
menu to turn the automatic answer on.
# To turn the automatic answer off, touch
AUTO ANSWER again.
Setting automatic rejecting
1 Touch NEXT on the function menu.
2 Touch REFUSE ALL CALLS to turn the
automatic call rejection on.
# To turn the automatic call rejection off, touch
REFUSE ALL CALLS again.
Switching the ring tone
1 Touch NEXT on the function menu.
2 Touch RING TONE to turn the ring tone
on.
# To turn the ring tone off, touch RING TONE
again.
Available accessories
En
59
Section
04
A
vailable
accessories