beautypg.com

Boosting the bass 37, Using the high pass filter 37, Adjusting source levels 37 – Pioneer AVH-P4000DVD User Manual

Page 37: Operating this unit, Boosting the bass, Using the high pass filter, Adjusting source levels

background image

5

Touch c or d next to FREQUENCY to se-

lect cut-off frequency.
Each time you touch c or d selects cut-off fre-
quencies in the following order:
50Hz

—63Hz—80Hz—100Hz—125Hz

Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.

Boosting the bass

Bass boost function boosts the bass level of
sound.

1

Touch BASS BOOSTER on the audio

function menu.

2

Touch c or d to select a desired level.

0 to +6 is displayed as the level is increased or
decreased.

Using the high pass filter

When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are output
from the front or rear speakers.

1

Touch HPF on the audio function menu.

2

Touch d next to HPF to turn high pass

filter on.

# To turn high pass filter off, touch c.

3

Touch c or d next to FREQUENCY to se-

lect cut-off frequency.
Each time you touch c or d selects cut-off fre-
quencies in the following order:
50Hz

—63Hz—80Hz—100Hz—125Hz

Only frequencies higher than those in the se-
lected range are outputted from the front or
rear speakers.

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-

dical changes in volume when switching be-
tween sources.
! Settings are based on the FM volume level,

which remains unchanged.

1

Compare the FM volume level with the

level of the source you wish to adjust.

2

Touch NEXT on the audio function

menu.

3

Touch SLA.

4

Touch c or d to adjust the source vo-

lume.
Each time you touch c or d it increases or de-
creases the source volume.
+4 to

–4 is displayed as the source volume is

increased or decreased.

Notes

! The MW/LW volume level can also be adjusted

with source level adjustments.

! Video CD, CD, compressed audio and DivX

are set to the same source level adjustment
volume automatically.

! External unit 1 and external unit 2 are set to

the same source level adjustment volume
automatically.

Operating this unit

En

37

Section

03

Operating

this

unit