beautypg.com

Seek (left/right key setting), Seek (left/right key set, Af (alter – Pioneer DVH-340UB User Manual

Page 12: 02 operating this unit, Using pi seek, Using auto pi seek for preset stations, Function settings

background image

OTHERS

EDUCATE (Education), DRAMA (Drama), CULTURE
(Culture),

SCIENCE (Science), VARIED (Varied), CHIL-

DREN (Children

’s), SOCIAL (Social affairs), RELIGION

(Religion),

PHONE IN (Phone in), TOURING (Travel),

LEISURE (Leisure), DOCUMENT (Documentaries)

Using PI Seek

If the tuner cannot find a suitable station, or
the reception status deteriorates, the unit
automatically searches for a different station
with the same programming. During the
search,

PI SEEK is displayed and the sound is

muted.

Using Auto PI Seek for preset
stations

When preset stations cannot be recalled, the
unit can be set to perform PI Seek during pre-
set recall.
! The default setting for Auto PI Seek is off.

Refer to

AUTO-PI (auto PI seek) on page 27.

Function settings

1

Press M.C. to display the main menu.

2

Turn M.C. to change the menu option

and press to select FUNCTION.

3

Turn M.C. to select the function.

After selecting, perform the following proce-
dures to set the function.

# If MW/LW band is selected, only BSM, LOCAL
and

SEEK are available.

BSM (best stations memory)

BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
1 Press M.C. to turn BSM on.

To cancel, press

M.C. again.

REGION (regional)

When AF is used, the regional function limits the se-
lection of stations to those broadcasting regional pro-
grams.
1 Press M.C. to turn the regional function on or off.

LOCAL (local seek tuning)

Local seek tuning lets you tune in to only those radio
stations with sufficiently strong signals for good re-
ception.
1 Press M.C. to select the desired setting.

FM:

OFF

—LV 1—LV 2—LV 3—LV 4

MW/LW:

OFF

—LV 1—LV 2

The highest level setting allows reception of only
the strongest stations, while lower levels allow the
reception of weaker stations.

PTY SEARCH (program type selection)

You can tune in to a station using PTY (program type)
information.
1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

NEWS/INFO

—POPULAR—CLASSICS—OTHERS

3 Press M.C. to begin the search.

The unit searches for a station broadcasting that
type of program. When a station is found, its pro-
gram service name is displayed.
For PTY (program type ID code) information, refer
to the previous page.
The program of some stations may differ from
that indicated by the transmitted PTY.
If no station is broadcasting the type of program
you searched for,

NOT FOUND is displayed for

about two seconds and then the tuner returns to
the original station.

TA (traffic announcement standby)

1 Press M.C. to turn traffic announcement standby

on or off.

AF (alternative frequencies search)

1 Press M.C. to turn AF on or off.

NEWS (news program interruption)

1 Press M.C. to turn the NEWS function on or off.

SEEK (left/right key setting)

You can assign a function to the left and right keys of
the unit.
Select

MAN (manual tuning) to tune up or down

manually or select

PCH (preset channel) to switch be-

tween preset channels.
1 Press M.C. to select MAN or PCH.

En

12

Section

02

Operating this unit