Setting the number of prints to be made, To entry the number of prints, Correcting entry – AGFA IT SR 24 User Manual
Page 49: Setting the number of prints to be made -24, Sr24it+ a3/a4 laser printer -3
2-24
Sc
ann
er
Ch
apte
r 2
12. Setting the Number of Prints to be Made
To Entry the Number of Prints
Set the desired number using the Multi-Print Key.
NOTE
This function is only available
when using the Printer mode.
The number that can be entered is 19 max.
Correcting Entry
To correct an entry, depress the Clean Button, which resets the number on the Multi-Print Dis-
play to “1”.
0820771003.book Page 24 Monday, March 19, 2001 2:49 PM