Konica Minolta bizhub 361 - Manual (Page 94)

501/421/361 2-77
Administrator Operations 2
2.13.2 Changing the Flash Memory Lock Password
2
Note
Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
2
Note
When the main power switch is turned OFF and ON, wait at least 10 seconds to turn it ON again after
turning it OFF. If there is no interval between turning the main power switch OFF and ON, the machine
may not function properly. Here is the sequence through which the main power switch and sub power
switch are turned ON and OFF.
Turn off the sub power switch → Turn off the main power switch → Turn on the main power switch → Turn
on the sub power switch.
0 To call the Flash Memory Lock Password entry screen to the display, see steps 1 through 3 of "Setting
the Flash Memory Lock Password" on page 2-74 .
1
Call the Flash Memory Lock Password entry screen to the display from the control panel.
2
Enter the 20-digit Flash Memory Lock Password from the keyboard and key pad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the Security Settings screen.
3
Select [Edit] and touch [OK].
? What happens if the Flash Memory Lock Password entered does not meet the requirements of
Password Rules?
% If the Flash Memory Password entered does not comply with the Password Rules, a message
appears saying that the Flash Memory Password entered cannot be used. Enter the correct Flash
Memory Lock Password. For details of the Password Rules.