Konica Minolta bizhub 361 - Manual (Page 72)

501/421/361 2-55
Administrator Operations 2
2.11 Changing the Administrator Password
When access to the Administrator of the machine from the control panel by the Administrator Settings is
authenticated, the machine enables the operation of changing the Administrator Password required for
accessing the Administrator Settings.
The Administrator Password entered for the authentication purpose appears as "*" on the display.
2.11.1 Changing the Administrator Password
2
Note
Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
0 For the procedure to call the Security Settings menu to the display, see steps 1 and 2 of "Setting the
Enhanced Security Mode" on page 2-11 .
1
Call the Security Settings to the screen from the control panel.
2
Touch [Administrator Password].
3
Enter the currently set 8-digit Administrator Password from the keyboard and keypad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the Security Settings screen.