Accton Technology ES3628EA - Manual (Page 42)

4-4
Making Network Connections
4
6. As a connection is made, check the Link LED on the switch corresponding to
the port to be sure that the connection is valid.
100BASE-FX fiber optic ports operate a 100 Mbps full duplex. 1000BASE-SX,
1000BASE-LX and 1000BASE-LH fiber optic ports operate at 1 Gbps full duplex. All
of these SFP modules also support auto-negotiation of flow control. The maximum
length for fiber optic cable depends on the fiber type as listed under “100 Mbps Fast
Ethernet Collision Domain” on page 4-5 and “1000 Mbps Gigabit Ethernet Collision
Domain” on page 4-4.
Connectivity Rules
When adding hubs (repeaters) to your network, please follow the connectivity rules
listed in the manuals for these products. However, note that because switches break
up the path for connected devices into separate collision domains, you should not
include the switch or connected cabling in your calculations for cascade length
involving other devices.
1000BASE-T Cable Requirements
All Category 5 UTP cables that are used for 100BASE-TX connections should also
work for 1000BASE-T, providing that all four wire pairs are connected. However, it is
recommended that for all critical connections, or any new cable installations,
Category 5e (enhanced Category 5) or Category 6 cable should be used. The
Category 5e specification includes test parameters that are only recommendations
for Category 5. Therefore, the first step in preparing existing Category 5 cabling for
running 1000BASE-T is a simple test of the cable installation to be sure that it
complies with the IEEE 802.3-2002 (formerly IEEE 802.3ab) standards.
1000 Mbps Gigabit Ethernet Collision Domain
Table 4-1 Maximum 1000BASE-T Gigabit Ethernet Cable Length
Cable Type Maximum Cable Length Connector
Category 5, 5e, 6 100-ohm UTP or STP 100 m (328 ft) RJ-45
Table 4-2 Maximum 1000BASE-SX Gigabit Ethernet Cable Length
Fiber Size Fiber Bandwidth Maximum Cable Length Connector
62.5/125 micron
multimode fiber
160 MHz/km 2-220 m (7-722 ft) LC
200 MHz/km 2-275 m (7-902 ft) LC
50/125 micron multimode
fiber
400 MHz/km 2-500 m (7-1641 ft) LC
500 MHz/km 2-550 m (7-1805 ft) LC