Equipment checklist, Package contents, Optional rack-mounting equipment – Accton Technology ES3628EA User Manual
Page 32: Figure 3-1, Rj-45 connections
3-2
Installing the Switch
3
Figure 3-1 RJ-45 Connections
Equipment Checklist
After unpacking the switch, check the contents to be sure you have received all the
components. Then, before beginning the installation, be sure you have all other
necessary installation equipment.
Package Contents
• ES3628EA 24 10/100 Ports + 4G L2/L3/L4 Intelligent Switch
• Four adhesive foot pads
• Bracket Mounting Kit containing two brackets and four screws for attaching the
brackets to the switch
• Power Cord—either US, Continental Europe or UK
• RS-232 console cable
• This Installation Guide
• Management Guide
Optional Rack-Mounting Equipment
If you plan to rack-mount the switch, be sure to have the following equipment
available:
• Four mounting screws for each device you plan to install in a rack—these are not
included
• A screwdriver (Phillips or flathead, depending on the type of screws used)
RJ-45 Connector