Kramer Electronics Site-CTRL™ - Manual (Page 20)

18 Site-CTRL - The Room List Tab
Figure 34: Update Firmware – the Scheduling Window
4. Make sure the setup is correct and then click Add.
The time update is added to the scheduled tasks list.
Note that you can select more than one file to update (see Figure 35 ). The system searches all the master
controllers + auxiliary devices and sends each updated firmware file to its designated device.
To do this you need to move all the relevant firmware files to one folder and select them all .
Figure 35: Update Firmware – the Scheduling Window with two Firmware Files
i