Kramer Electronics VP-4x4K - Manual (Page 17)

VP-4x4K - Connecting the VP-4x4K 13
This type of connection is recommended for identification of the
factory default IP Address of the
VP-4x4K during the initial
configuration. (The default IP address is 192.168.1.39).
After connecting the Ethernet port, configure your PC as follows:
1. Right-click the My Network Places icon on your desktop.
2. Select Properties.
3. Right-click Local Area Connection Properties.
4. Select Properties.
The Local Area Connection Properties window appears.
5. Select the Internet Protocol (TCP/IP) and click the Properties Button (see
Figure 6 ).
Figure 6: Local Area Connection Properties Window
6. Select Use the following IP Address, and fill in the details as shown in
Figure 7 .
7. Click OK.
i