Attero Tech unDX2IO - Manual (Page 8)

unDX2IO
User Manual
 Attero Tech LLC 2013 Page 7 614-00016-01
2.2.2 – Input from a Balanced Source
To connect balanced sources to the unDX2IO, connect positive output to positive input, negative output to negative
input, and connect the grounds together through the cable shield.
Figure 4 - Balanced Source Connection
2.2.3 – Output to a Balanced Destination
To connect to a balanced input on a destination device, connect the positive, negative, and ground connections of both
the unDX2IO output to the destination input respectively.
Figure 5 - Output to Balanced Destination Connection
2.2.4 – Output to an Unbalanced Destination
To connect the unDX2IO outputs to a 2-wire unbalanced input, connect the positive output to the destination’s positive
input and connect the grounds together through the cable shield. Leave the unDX2IO negative output floating.
Figure 6 – Output to Unbalanced Destination