Glastender GT-30 - Manual (Page 6)

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
4
I
Tem
n
umber
d
escrIpTIon
1 Glass Stop Arm
2 Drain Plug (2 required)
3 Pump Inlet Screen (2 required) - One pump inlet screen is in the rinse tank hidden from
view below the rinse tank guide.
4 Heater
5 Spray Box Cam Lock
6 Wash Tank Liquid Control and Low-Level Pick-Up Tube - The rinse tank liquid control
and low-level pick-up tube is hidden from view by the rinse tank pick-up tube cover.
7 Detergent Inlet Tube
8 Hot Water Inlet and Air Gap (in side wall) - Pick-up tube cover has been removed for
illustrative purposes.
9 Wash Tank
10 Wash Spray Box
11 Rinse Tank
12 Rinse Tank Pick-Up Tube Cover - The cold water inlet and sanitizer inlet tube are under-
neath the cover
13 Conveyor Drive Shaft
14 Rinse Spray Box
15 Rinse Tank Guide
16 Drain Tank with Drain Screen
Please familiarize yourself with the following parts:
n
oTe
: Figure 2 shows a model GT-24 with clockwise conveyor movement. Counterclockwise
conveyor movement models have identical parts in reverse positions.
16
15
14
2
4
7
6
5
9
13
12
8
10 11
F
IGure
2
m
aIn
s
ecTIon
- T
op
V
Iew
1
3