Air power pack maintenance – Hawk Industries Spinner Manual 950 PNEUMATIC Serial Numbers 81 to 189 User Manual

Page 35

Maintenance & Repair

HOC

HFE

1. Check oil level once per week.

2. Remove hydraulic oil cap (HOC)

located on the top of the hydrau-

lic tank. Oil should be main-

tained at a level no lower than

3" below the top of the tank,

and no higher than 1" from the

top of the tank.

3. If the level is too low, add #10

wt. foam suppressed hydraulic

oil.

1. The Hydraulic filter cartridge

should be changed once every

six (3) months of operation.

2. Unscrew the hydraulic filter car-

tridge (HFE) and replace.

Hydraulic Oil Level

Changing Oil Filter Cartridge

Part Name

Part #

Filter Element (HFE)

031-P11-1

Part Numbers

Air Power Pack Maintenance