Hawk Industries Spinner Manual 950 PNEUMATIC Serial Numbers 81 to 189 - Manual (Page 31)

31 Maintenance & Repair
Air Power Pack Maintenance
SG
FP
1. Check oil level at least once per
day using oil level sight gage
(SG) .
2. To add oil to the air lubricator,
remove filler plug (FP).
3. Use a small funnel and fill lubri-
cator with #10 wt. pneumatic oil
up to the filler cap.
4. Replace filler cap.
The Air Spinmaster air mo-
tors (Main Motor & Power
Pack Motor) must be lubri-
cated to provide dependable
service. Air motors will
rust up on the inside and
lock up if not lubricated.
WARNING
Filling Air Lubricator