Vaddio WallVIEW 100 Technical - Manual (Page 11)

11
Basic Functions
Initial Values and
Backup
Initial values of functions of the EVI-D100/P are
indicated in the “Initial values” column.
An a in the “Backed up/Not backed up” column
indicates that the setting is memorized in the camera.
An
× indicates that it is not.
Category Mode/Position Initial values
Backed up/Not backed up
(a: Backed up,
×
: Not backed up)
Pan/Tilt Pan/Tilt Position Home position a
Pan/Tilt Limit Position movable-range maximum a
Zoom Zoom Position Wide end a
Digital Zoom On/Off On a
Focus Focus Mode Auto/Manual Auto a
AF Sens High/Low High a
Focus Position — a
Near Limit Near end a
WB WB Mode Auto a
R/B Gain — a
AE AE Mode Full Auto a
Slow Shutter Auto/Manual Manual a
Shutter Position — a
Iris Position — a
Gain Position — a
Bright Position — a
ExpComp On/Off Off a
ExpComp Position ±0 a
Back Light On/Off Off a
Aperture Aperture Gain 5 a
Effect Wide Mode Off
×
LR Reverse On/Off Off
×
Freeze On/Off Off
×
Picture Effect Mode Off
×
Digital Effect Mode Off
×
Digital Effect Level 0
×
OSD Datascreen On/Off Off
×
IR IR_Receive On/Off On a 1)
IR_ReceiveReturn On/Off Off a 1)
AutoPowerOff Auto Power Off Timer 0 a 1)
Memory Position Preset Data — a
VISCA VISCA Address 1
×
1),2)
1) The data items are backed up regardless of the BACKUP switch
setting when you turn the power off using a VISCA command or
the Remote Commander (standby mode).
2) When the camera is in the D30/D31 mode, the VISCA address is
backed up.