Power Soak 34773 ps-200/201 Service Manual - Manual (Page 6)

3
Troubleshooting
Hazard to Untrained or Unauthorized Personnel.
The following procedures are provided for use by an authorized service
agency. No facility owner, manager, employee or other unauthorized
person should attempt to perform any of these procedures. To obtain
the name of a recommended service agent in your area, please call the
Power Soak Service Department. 800-444-9624.
When performing trouble shooting procedures, the authorized service
agency will need to open the electrical enclosure on the Power Soak
machine.
The control panel must be properly closed before reconnecting the
power to the machine.
Pump leaks
Look for Correction
1 Defective ADAPTER O-RING Replace
2 Defective PUMP SEAL Replace
Intermittent running
See “Pump does not work” below