ATEN ATEN MasterView CS-1732A - Manual (Page 23)

Alternate Port Switching Keys
The port switching activation keys can be changed from tapping the Scroll Lock key
twice ([Scroll Lock] [Scroll Lock]) to tapping the Ctrl key twice. To change the port
switching activation keys, do the following:
1. Invoke HSM (see p. 16)
2. Press and release the T key
Note: This procedure is a toggle between the two methods. To revert back to the
original [Scroll Lock] [Scroll Lock] method, invoke HSM, then press and release
the T key again.
Keyboard Operating Platform
The CS-1732 A / CS-1734 A ‘s default port configuration is for a PC Compatible keyboard
operating platform. If your requirements call for different port settings (you have a Mac or
Sun attached to a port, e.g.), you can change a port’s keyboard operating platform
configuration as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see p. 16)
3. Press and release the appropriate Function key (see table). After completing a setting,
you automatically exit HSM.
Function Key Operation
[F1] Sets the PC Compatible keyboard operating platform.
[F2] Sets the Mac keyboard operating platform.
[F3] Sets the Sun keyboard operating platform.*
* The first time that the Sun system runs from a port, you must configure its port for the
Sun keyboard operating platform before you turn the system on, or else the Sun
system will not start.
2005-12-21
Hotkey Operation
17