Sony VGP-UHDP04 - Manual (Page 12)

12
Setting the security function
Notes
• Do not disconnect the USB cable when the wireless keys are being registered.
• Be sure that the computer is not in power save mode when the wireless keys are being
registered.
• You need to register both wireless keys.
• Be sure that the ACCESS indicator goes out before registering the wireless key.
1
Turn on the computer and connect the hard disk drive using
the USB cable (page 8).
2
Press the REGIST button.
The blue light of the wireless key receiver flashes.
z Tip
If you do not touch the wireless key receiver with a wireless key for more than about
5 seconds, the blue light of the wireless key receiver will go out and the previous
status returns.
3
Touch the wireless key receiver with one of the wireless
keys.
The LOCK and UNLOCK indicators flash alternately, then the
wireless key is registered to the hard disk drive.