beautypg.com

Sony LF-B10 User Manual

Network setup mode/ net av setup mode reset

background image

Sony LF-B10 2-889-814-

11 (1)

6

Make sure that the NETWORK LED lights in green.

NETWORK

SETUP MODE/

NET AV

SETUP MODE

RESET

NETWORK

The LED will light in green

Note

The NETWORK LED will flash in green while the IP address is being obtained.
Obtaining the IP address may take a while.

7

Make sure that the SETUP MODE/NET AV LED turns off.

NETWORK

SETUP MODE/

NET AV

SETUP MODE

RESET

SETUP MODE/

NET AV

The LED will be turned off

The flashing SETUP MODE/NET AV LED will be turned off when you complete the settings for watching video
content from the LocationFree Base Station on the go.

Note

The settings of the Base Station is incomplete when the SETUP MODE/NET AV LED lights in orange.
Please read the Operating Instructions installed on the CD-ROM which is enclosed in the package.

When you use your PC as a LocationFree client device:
(1) Install the LFA-PC20 LocationFree Player software on your PC and
(2) Follow the setup wizard to complete the settings for accessing the Base Station outside of your home/on the go.
This concludes your Base Station configuration and setup. You now should be able to view the video content fed to
your Base Station inside and outside of your home.

1

Attach the LocationFree Base Station stand to the

LocationFree Base Station.

Stand

Slit

Hook

2

Connect the LocationFree Base Station to your audio/video devices.

Video Output

Video Input 1 or 2

IR BLASTER

LAN

1

2

S VIDEO

IN 1

IN

OUT

VIDEO

AUDIO

L

R

VIDEO

AUDIO

L

R

VIDEO

DC IN 12V

AUDIO

L

R

IN 2

OUT

IN 1

IN

VIDEO

AUDIO

L

R

S VIDEO

OUT

VIDEO

AUDIO

L

R

OUT

S VIDEO IN

VIDEO IN

AUDIO IN

L

R

S VIDEO OUT

VIDEO OUT

AUDIO OUT

L

R

IR BLASTER

1

2

S VIDEO IN

VIDEO IN

AUDIO IN

L

R

Using the composite audio/video and the S-Video cables, connect the video

devices such as STB and DVR to the composite audio/video and S-Video

output jacks on the back of the Base Station.

Video signal from the video device, which is plugged to Video Input 1 on the backside of
the LocationFree Base Station, will be emitted through Video Output.

TV, etc.

Video Input

Video Output
(Video signal from
Video Input 1 will
be emitted)

The backside of the
LocationFree Base Station

Connect the Base Station to your video devices such as a set-top box (STB),

DVD or DVR.

Connect the LocationFree Base Station to your STB, DVD or DVR.
Connect the IR blaster to the IR blaster
connector on the backside of the LocationFree
Base Station to configure the on-screen remote
control.
After you complete the settings, please turn
on the video devices.

STB, DVD, and DVR

IR blaster

Remote control
infrared transmitter

Remote control
infrared receiver

 Tips
Orient the infrared
transmitter of the end
of the IR blaster so that
it faces the infrared
receiver(s) on your
DVR, DVD and STB.

IR blaster port 1 or 2
Both ports are available

or

IR blaster

Remote control
infrared receiver

or

5

Turn on the power.

NETWORK

SETUP MODE/

NET AV

SETUP MODE

RESET

The POWER
LED will light
in green

POWER LED

4

Plug in the power cord.

IR BLASTER

LAN

1

2

S VIDEO

IN 1

IN

OUT

VIDEO

AUDIO

L

R

VIDEO

AUDIO

L

R

VIDEO

DC IN 12V

AUDIO

L

R

IN 2

OUT

DC IN 12V

Power cord (enclosed)

AC power adapter (enclosed)

2-889-814-

11(1)

Quick Start Guide

LocationFree Base Station LF-B10

Before you start setting up the LocationFree Base
Station, please check the followings

Note:
Please be sure to handle the information
with care, which is necessary for registering
your device(s) with the Base Station.
Disclosing such information to stranger(s)
may result in allowing them to access your
Base Station without your permission. For
more details about this, please refer to the
Operating Instructions which is installed on
the LFA-PC20 LocationFree Player CD-
ROM.

Preparing LocationFree client device(s)

Please prepare one of the following LocationFree client devices (some of the client devices listed below
may require a LFA-PC20 LocationFree Player software which is enclosed in the package).
Windows PC

Please install the LFA-PC20 LocationFree Player software, which is enclosed in the package, on your
PC.

PSP® (PlayStation® Portable)

Please upgrade the software installed on a PSP® to the latest version.

Please refer to the following website for more details about other LocationFree client devices.

URL: sony.com/locationfree

Other necessary items

LAN cable

Use the LAN cable to connect the LocationFree Base
Station to your router.

Composite audio / video cable

Use the composite audio/video cable to connect the
LocationFree Base Station to your audio / video devices.

Broadband router

A broadband router is recommended for viewing the
content from the Base Station on your LocationFree client
devices. A UPnP-enabled router is also recommended for
accessing the Base Station via the Internet (Please visit
our website for more details: sony.com/locationfree).

Check the content of the package

LF-B10 LocationFree

Base Station

AC-LX1B AC adapter

Power cord

LocationFree Base

Station stand

LFA-PC20 LocationFree

Player software CD-ROM
(it includes the
Operating Instructions
and a serial key)

IR blaster

Quick Start Guide
Warranty

* For more details, please refer to the Operating Instructions installed

on the CD-ROM which is enclosed in the package.

Sony, LocationFree, and the LocationFree logos are trademarks of Sony.
“PlayStation” and “PSP” are registered trademarks of Sony Computer Entertainment Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries.
All other company names and product names mentioned here may be the trademarks or registered trademarks of their
respective companies.
The symbols for ™ and ® are omitted in these instructions.

©2006 Sony Corporation Printed in Japan

Install the LocationFree Player Software

Before you install the Player software, please make sure that your PC and the Base Station are connected with the same router.

3

After the software installation is completed, double-click the “LocationFree Player” icon which appears on the desktop of your PC.

The LocationFree Player starts up and the setup wizard starts.

4

By following the setup wizard, register your PC to the Base Station and specify your video device(s) connected to the Base Station through the on-screen remote control setup pages

to control those devices with the on-screen remote control on your PC.

1

Insert the CD-ROM to your computer.

Software installation begins automatically.

2

Install the LocationFree Player by following the on-screen installation instructions.

How to use this guide

LF-B10 LocationFree

Base Station

IR Blaster

LAN cable

Router

STB, DVR

Composite audio/
video (white, red and
yellow plugs) cable

PC

Wired LAN/

Wireless LAN/

Internet

Connecting / Setting up the LocationFree Base Station

Connect the LocationFree Base Station to your audio/video devices and to your network based on this
guide.

For connecting your devices to the Base Station and configuring your devices, please refer to the
Operating Instructions installed on the CD-ROM which is enclosed in the package.
If you would like to use this product with a Windows PC, please follow the instructions on this document,
installing the LocationFree Player software and completing the settings.
For connecting other devices to the Base Station, please refer to the Operating Instructions.

Connecting the Base Station

For Help

Please refer to the Operating Instructions for LF-B10 or LFA-PC20 on your PC desktop, contact
the LocationFree Customer Support or visit our website at: sony.com/locationfree

Contact information for the LocationFree Customer Support

Product detalis
(Product name)

3

Connect your router with the Base Station based on one of the following methods.

A. Connect your router with the Base Station using a LAN cable

B. Connect your router with the Base Station using a Powerline Ethernet adapter

C. Connect your router with the Base Station using a wireless router

LAN

IR BLASTER

LAN

1

2

S VIDEO

IN 1

IN

OUT

VIDEO

AUDIO

L

R

VIDEO

AUDIO

L

R

VIDEO

DC IN 12V

AUDIO

L

R

IN 2

OUT

LAN cable (not enclosed)

Router

To LAN port

LAN

IR BLASTER

LAN

1

2

S VIDEO

IN 1

IN

OUT

VIDEO

AUDIO

L

R

VIDEO

AUDIO

L

R

VIDEO

DC IN 12V

AUDIO

L

R

IN 2

OUT

To LAN port

Powerline

Ethernet adapter

(not enclosed)

Router

LAN cable

(not enclosed)

LAN cable

(not enclosed)

LAN

IR BLASTER

LAN

1

2

S VIDEO

IN 1

IN

OUT

VIDEO

AUDIO

L

R

VIDEO

AUDIO

L

R

VIDEO

DC IN 12V

AUDIO

L

R

IN 2

OUT

LAN cable

(not enclosed)

Wireless router

Wireless Network

adapter (not enclosed)