Sony PCGA-DVD51 - Manual (Page 18)

18
Using the DVD-ROM drive (continued)
Removing a disc
Confirm that the BUSY indicator is not flashing and
press the eject button.
When the disc tray does not eject
Confirm that the BUSY indicator is not flashing,
detach the manual eject pin from the PC card
depression of the bottom panel, and insert it into the
manual eject hole. The disc tray ejects and you can
remove the disc.
Note
Place the DVD-ROM
drive on a level surface
and then insert the
manual eject pin into the
manual eject hole.
Eject button
BUSY indicator
Manual
eject pin
Manual eject hole