Audiovox Jensen VM8022 - Manual (Page 12)

VM8022
8
DISC/MP3/WMA PLAYBACK
Insert and Eject Disc
Insert a disc, label side up, into the disc slot (18).
To stop disc play and eject the disc, press the eject button (4).
NOTE: The unit is designed for play of standard 5” (12 cm.) discs only.
Do not attempt to use 3” (8 cm.) CD singles in this unit, either with or
without an adaptor, as damage to the player and/or the disc may
occur. Such damage will not be covered by the warranty on this
product.
Controlling Disc or File Playback
Pause
Press the pause >/|| button (8) to suspend playback. Press the pause >/||
button again to resume playback.
Track Select
Press the TUNE/TRACK >>| or |<< buttons (17) for less than one second to
advance to the next track/file. The selected track number will appear on the
display.
Fast Forward/Reverse
Press and hold the TUNE/TRACK >>| or |<< buttons (17) to fast forward or
fast reverse. Press and hold once for 2X. Press and hold additional times
for 4X, 8X, 20X or PLAY. Press the play/pause >/|| button (8) to end fast
forward or reverse and resume normal playback.
Intro Scan (INT)
During disc play, press the INT button (9) to select “INTRO” and play the
first 15 seconds of each track/file. When the desired track is reached, press
INT again to end the scan and play the selected track.
Repeat (RPT)
Press the RPT button (10) multiple times during playback to select from the
following repeat play options:
• VCD/CD: RPT ONE (track), RPT ALL (disc), RPT OFF
• DVD: RPT CHAPTER, RPT TITLE, RPT OFF
• MP3/WMA: RPT ONE (file), RPT DIR (directory/folder), RPT ALL (disc),
RPT OFF
Random (RDM)
Press the RDM button (11) during playback to select “RANDOM” and play
all tracks/files in random, shuffled order. Press RDM again to stop random
play.
Section Repeat (A-B)
To repeat a specified section of a track, perform the following steps:
1. Press the A->B button on the remote control to select the starting point.
The display will show “REPEAT A-”.
2. Press A->B when you reach the desired ending point. The display
shows “REPEAT A-B” and the selected section will play repeatedly.
To cancel section repeat, press the A->B button again. “A-B CANCEL”
appears on the display.
GOTO Direct Track Access
Use the GOTO function to access a track directly.
1. Press the GOTO button on the remote control. The track number will
become highlighted.
2. Use the number keys on the remote control to enter the track number
directly.
3. Press the ENTER button to confirm and begin playback.
VM8022
VOL
LO/DX
LOUD
3 4 RDM
2 INT
1
5
6
SD/MMC
AS
/
RPT
20
21
23
22
18