Sony BDP-S560 - Manual (Page 13)

1
Internet Settings - Network Connection Diagnostics
Do not perform
Perform network connection diagnostics?
Diagnostics cannot be stopped midway.
Network connection diagnostics can also be performed under "Setup".
Perform

Network Connection Diagnostics
Network connections are correct.
Finish

List of settings
Settings are complete.
Connection Method
Wireless LAN Setting Method
SSID
Security Setting
WPA Key
IP Address Settings
IP Address
Wireless
Access point scan
AP_for_BDP
WPA2-PSK (AES)
********
Auto Acquisition
192.168.011.002
Internet Settings - Complete Settings
Finish

Network Connection Diagnostics show
you if your networks are set up correctly.
Select “Perform,” and press ENTER. Press ENTER when “Network connections
are correct.” appears.
If an error message appears, follow the on-
screen instructions.
For further details, visit the following
website and check the FAQ contents:
http://www.sony.com/blurayupdate Press ENTER when “Settings are
complete.” appears.
Wi-Fi Setup is finished.
 Tip
If an error message appears in the network
diagnostic results, check the message and set
the network settings again.