Ferguson Ariva S300 - Manual (Page 9)

4.1 Installation of batteries
Remove the cover of the battery compartment on the rear panel of the remote control unit;
slide it downwards and put it aside. Insert two AAA (R03) batteries into the compartment,
observing the indicated polarity. Do not mix old and new batteries, or batteries of
different types. Replace the battery compartment cover. Slide it upwards until it locks in place.
5. Front panel
Description
POWER Turns the receiver on and sets it in standby mode.
 Switches to the next/previous channel, moves the cursor up/down in
the Menu.
 Used to select the desired volume level (lower, higher) and move the
cursor left/right in the Menu.
OK Selects options in the Menu or displays the channel list.
MENU Displays the main Menu on-screen.
CA Socket for a subscriber's card – always insert with the chip facing
down!
CA: Socket for a subscriber's card – always insert with the chip facing down!
6. Rear panel
Description
LNB INPUT Input of the antenna.
LOOP-OUT Output of the signal to another receiver.
HDMI Digital image and sound output.
LAN The Ethernet port used for communication over the LAN
network/Internet.
USB USB port for HDD and flash devices.
SCART Analogue audio and video output.
SPDIF Digital audio output.
RS232 RS232 port for communication with a PC computer.
ON/OFF Power on/off switch.
9