Ferguson Ariva S300 - Manual (Page 17)

The correct setting of the antenna is indicated by bars presenting the strength and quality of
the signal. Both should indicate more than 70% for channel reception to be free of interference.
In order to check the strength and quality settings, use the "transponder" option in order to
alter the frequency and verify whether each V and H polarization is operative.
If as the antenna connection you have selected: antenna with positioner, the antenna settings
menu will have a different appearance. Two operating standards will be available for the
positioner: USALS or DiSEqC 1.2. We recommend using USALS positioners, for which only the
correct longitude and latitude must be given.
10.2 Satellite search
In this menu you can search for channels from one selected satellite. To start the scanplease
choose the green button. Available settings:
1. Scan type
-All: it looks for FTA and scrambled channels;
-FTA: it looks only for FTA channels.
2. Service type
-All: it looks for TV and radio channels;
-TV: it looks only for TV channels;
-Radio: it looks only for radio channels.
3. Scan mode
-All TP: scans all the frequencies contained in the predefined list of transponders;
-All TP+NIT: scans all the frequencies contained in the predefined list of transponders
and extra transponders contained in the NIT;
-One TP+NIT: scans a pre-selected frequency and the frequencies listed in the NIT of the
17