Ferguson Ariva S300 - Manual (Page 33)

Browsing through a recording – during recording.
1. The contents of a recording are available for browsing in the course of recording.
2. Use the Fast forward and Rewind buttons to navigate within a current recording and press the
PLAY button in order to start viewing from a selected moment.
18.7 PAUSE - time shift
This function is available only when an external USB memory device is correctly connected!!!
The time shift mode allows the user to control the television broadcast by "pausing" and then
resuming it from the same point. From the moment you switch on the time shift mode, the
Ferguson receiver will constantly record the signal from the satellite in a buffer. The buffer is
created automatically on the external USB memory device.
Pausing the television broadcast
1. Press PAUSE
2. The time elapsed bar will now be visible on
the screen
3. Press the PLAY button in order to resume
the television broadcast. The Ferguson
receiver continues to record the television
broadcast when viewing the previously
broadcast programme.
Keep in mind that during buffer playback, the information bar may be hidden by means of
the BACK button. In order to restore the bar, press PAUSE/PLAY again.
Scrolling the contents of the time shift buffer (playback of an earlier television
broadcast).
1. Switch on the time shift mode by pressing PAUSE.
2. The contents of the time shift buffer can now be scrolled through.
3. Use the Fast forward and Rewind buttons to navigate through the time shift buffer and
press PLAY in order to start playback.
Recording the time shift buffer
1. This option is available only if previously switched on in the receiver's menu.
2. Switch on the time shift mode by pressing PAUSE.
3. Press REC in order to record the existing buffer and continue recording the channel.
4. Perform further operations in accordance with description given for the recording
function.
5. It is also possible to view the contents of the current recording as above.
Switching off the time shift mode
Switch off the time shift mode by means of the STOP button.
Keep in mind: when no external memory device is connected to the USB port, the PAUSE
button is used to temporarily pause the image, i.e. freeze-frame.
33