Adaptec ACS-100 - Manual (Page 7)

6
Getting Started Checklist
Complete these steps to install and begin using your Adaptec
ACS-100 USB Enclosure:
❏ Install the device driver—Windows 98SE only (see below).
❏ Install a disk drive (see page 7 ).
❏ Connect the enclosure and power it on (see page 9 ).
❏ Prepare the disk drive for use (see page 9 ).
Installing the Device Driver–Windows 98SE Only
Note: Windows XP/2000/Me and Macintosh users—No driver
installation is required. Your Adaptec ACS-100 USB Enclosure
works with the drivers built into your operating system.
Continue with
Installing a Disk Drive on page 7 .
Before you begin, ensure you have the most recent operating
system updates installed on your computer. Refer to the Microsoft
Web site to download updates.
To install the device driver:
1 Power on your computer, if you have not already done so.
2 Insert the CD into your CD-ROM drive.
3 From the Windows Start menu, click Run, then click Browse.
4 Browse to the CD-ROM drive, then double-click Setup.exe to
begin the driver installation.
5 Follow the on-screen instructions to install the driver.