Adaptec ACS-100 - Manual (Page 6)

5
Kit Contents
■ Adaptec ACS-100 USB Enclosure
■ One enclosure stand
■ One power adapter
■ One high-quality USB cable
■ One bag of screws
■ CD, including device drivers and documentation
A disk drive is not included in the kit. The Adaptec ACS-100 USB
Enclosure supports 3.5-inch IDE hard disk drives.
System Requirements
To successfully install and use your Adaptec ACS-100 USB
Enclosure, your computer must meet these requirements:
■ Microsoft
®
Windows
®
computers must be running
Windows XP, Windows 2000, Windows Me, or Windows 98SE
Macintosh computers must be running OS 9.2.2 or later for
USB 1.1 support, or OS 10.2.7 or later for USB 2.0 support
■ Available USB port (see About USB 2.0 Performance below for
more information)
■ CD-ROM drive
About USB 2.0 Performance
Your Adaptec ACS-100 USB Enclosure is a USB 2.0 device. For it to
operate at USB 2.0 speeds, it must be connected to a USB 2.0 port,
and USB 2.0 drivers must be installed on your computer.
If your computer does not have a built-in USB 2.0 port, Adaptec
recommends connecting the USB Enclosure to an Adaptec USB 2.0
adapter for the highest-quality USB 2.0 connection.