American Dynamics MegaPower CPU ADMPCPU - Manual (Page 19)

MEGAPOWER CPU 8200-0421-02, REV. E
OPERATOR’S GUIDE 17 of 21
Function Actions
DirectSet
(SensorNet only) • -Press only to display or close the DirectSet menu, or
• -Enter 0 -press to display or close the DirectSet menu, or
• -Enter a number -press to select a DirectSet menu command whether
or not the menu is displayed
Notes:
• When in Program mode, the ADCC0300 keyboard provides additional
administrative functions (see Programming Functions below for instructions for
entering Program mode).
• All SpeedDome Optima camera domes can receive DirectSet commands, but do
not display the menus.
Programming Functions
Note: Programming functions depend on the communications protocol in use and may not be available for
your keyboard. Functions having an asterisk (*) in the Function column require PROGRAM MODE, which is
indicated by the unlocked icon displayed in the LED.
Function Action
Enter Program Mode -Enter 999 -press -enter passcode -press ENTER
Exit Program Mode -Enter 999 -press
* Program Presets -Call camera -move camera into position -press
-enter Preset # -press
* Program Patterns -Call camera -move camera into position
-press
-enter number (1-3)
-press -maneuver camera with joystick
-press to save pattern
* Clear Patterns -Press -enter Pattern # (1-3) -press
-press to delete pattern