ASKO W6641 W661 User Manual
Page 16

Page 16
To change the language, follow the steps below:
1. Turn the machine off then on again.
2. Press
ENTER five times in succession then press
P1 five times. (This must be done within 15 seconds.)
3. When the Language menu displays, press
t o
advance to the desired language.
4. Once the correct language displays, press
ENTER
to program the LCD window to display the language
you selected.
5. Press
ENTER again to permanently save your
program setting.
CHANGING
CHANGING THE
THE TEMPERA
TEMPERATURE
TURE
READOUT ON
READOUT ON THE L
THE LCD
CD WINDO
WINDOW
W
FROM CELSIUS TO FAHRENHEIT
FROM CELSIUS TO FAHRENHEIT
You can change the temperature readout on the LCD
window from Celsius to Fahrenheit and vice versa. To
do this follow the steps below:
1. Turn the machine off then on again.
2. Press
ENTER five times in succession then press
P2 five times. (This must be done within 15 seconds.)
3. When the Temperature menu displays, press an
Arrow button to toggle between Fahrenheit and
Celsius.
4. When your preference displays, press
ENTER to
program the LCD window to display the temperature
reading you selected.
Spin Speed
Spin Speed
This lets you set the spin speed. The spin speeds
advance in 200 rpm increments. Only the spin speeds
available for the wash program you selected will display.
(See chart on page 14.)
1. Press
MENU until “Select spin speed” displays.
2. Use the
Arrow buttons to raise or lower the spin
speed setting.
3. When the spin speed you prefer displays, press
ENTER. The LCD will display the new spin speed.
4. Press
ENTER again to permanently save your
program setting.
Delayed Start
Delayed Start
This lets you set a delayed start from 1 to 24 hours.
This means you can set the washer to start at the most
convenient time for you, such as an hour before you
arrive home from work. This feature is also useful in
areas where utility companies offer discount rates
during off-peak hours.
1. Press
MENU until “Select time for delayed start”
displays.
2. Use the
Arrow buttons to increase or decrease the
delay time. (The numbers indicate hours.)
3. When the number of hours you want to delay starting
the machine displays, press
ENTER. The LCD will
display the delay start time.
4. Press
ENTER again to permanently save your
program setting.
Selecting Options
Selecting Options
This lets you select Super Rinse, ECO (Economy), Pre-
soak, Anti-crease, or High Water level.
1. Press
MENU until “Select options” displays.
2. Continue to press
MENU to scroll through the
options.
3. When the option you wish to select displays, press
an
Arrow to toggle between Off and On.
4. Press
ENTER. The LCD will display the new setting.
5. Press
ENTER again to permanently save your
setting.
RESTORING A PRESET
RESTORING A PRESET
PROGRAM
PROGRAM
To restore a preset program to its original settings,
simply press the button for the preset program you want
to restore and hold it down while your press
ENTER.
The program will revert to its original settings.
NOTE:
If you change the P3 program then decide to
restore its original settings, after pressing P3
and ENTER, you must go into the Options
menu (see page 14) and turn off Short Spin.
♦
English
♦
French
♦
Spanish
♦
Portuguese
♦
Italian
♦
German
♦
Swedish
♦
Danish
♦
Norwegian
♦
Netherlands
♦
F i n n i sh
CHANGING
CHANGING THE LANGU
THE LANGU A
AGE
GE
ON
ON THE L
THE LCD
CD WINDO
WINDOW
W
There are eleven languages available for the LCD
window: