The contr the contr ol p ol panel anel, W6021 programs and options, Power button – ASKO W6641 W661 User Manual
Page 10: Start/stop button, Door open button, Interrupting or changing a program
Page 10
THE CONTR
THE CONTR OL P
OL PANEL
ANEL
W6021 OPERA
W6021 OPERATING INSTR
TING INSTRUCTIONS
UCTIONS
W6021 PROGRAMS AND OPTIONS
W6021 PROGRAMS AND OPTIONS
Definition
Option
Super Rinse – Provides two additional rinses. Recommended for persons with sensitive skin or allergies.
Reduces the spin speed from 1200 rpm to 800 rpm. (Does not apply to Rinse and Spin programs.)
800
No Spin/No Drain – Omits spin cycles in all programs and final drain. If you select this option, you will
have to run the Drain program (11) before you can open the door.
Door Open Button
Press to open the glass door. (Please
note that the unit must be at the end of a
program to open the glass door.)
Super Rinse Button
Press to program
seven rinses.
Start/Stop Button
Press to start or stop/
interrupt a program.
Power Button
Press to turn on power
to the machine.
Program Control
Turn to select a program. (Please
note that the dial does not move
as the program advances.)
Power Indicator Light
Glows when the power
is turned on.
Temperature Control
Turn clockwise to select
the wash temperature.
800 RPM Spin Button
Press to reduce spin speed
from 1200 rpm to 800 rpm.
No Spin/No Drain
Press to omit the
spin and final drain
cycles.
Your ASKO washer has several programs and options
specifically designed to give you the cleanest laundry
possible. The tables below define each program and
option.
CAUTION!
Some fabrics may not be able to withstand extremely hot temperatures. Please
refer to the Recommended Wash Temperatures chart on page 9.
Dial
#
Program
Pre-
wash
Main
Wash
Wash
Action
Temp.
(° F)
#
Rinses
Int.
Spin
Final
Spin
Spin
Speed
Load
Size
1
Stain
yes
Long
Normal
140
5
2
Long
1200
Full
2
Heavy wash
no
Long
Normal
140
5
2
Long
1200
Full
3
Normal wash
no
Short
Normal
105
5
2
Long
1200
Full
4
Synthetic wash
no
Short
Normal
105
3
no
short
800
Half
5
Quick wash
no
Short
Normal
105
3
no
Long
1200
Full
6
Super quick wash
no
Short
Normal
105
2
no
Short
800
Half
7
Wool wash
no
Short
Gentle
85
3
no
Short
800
Third
8
Hand wash/Delicate
no
Short
Gentle
85
3
no
Short
800
Third
9
Rinse
n/a
n/a
n/a
n/a
1
n/a
Long
1200
Full
10
Spin
n/a
n/a
n/a
n/a
n/a
n/a
Long
1200
Full
11
Drain
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Full
POWER BUTTON
The Power button turns the power to the machine on
and off. When the power is on, the power indicator light
glows red. The power must be on before you can open
the door, set the programs or start the machine.
START/STOP BUTTON
Once you’ve selected the program and options, press
this button to start the washer. To stop the washer during
a program, press and hold this button down for a few
seconds. If you press this button to stop a program, you
will have to reselect the program to restart the unit.
DOOR OPEN BUTTON
The power must be on and you must press this button
to open the door. There will be a few seconds delay
before the door opens. Please note that the unit must
be at the end of a program and the water drained before
the door will open.
INTERRUPTING OR CHANGING A
PROGRAM
If you wish to interrupt a program to add an item to the
wash, press and hold the Start/Stop button until the unit
stops. Turn the Program Control knob to 11 (Drain) to
drain the water. Press the Door Open button. The door
will open when the water has drained. Insert the item
you wish to wash and close the door. Add detergent (if
needed), turn the control knobs to the desired settings,
and press Start/Stop to restart the machine.
NOTE:
Program times will increase when you select higher wash temperatures. (See “Temperature Control” on page 3.)